Stomra Guides

Stomra · Guide

Drafting on the model

The model carries the building; the drawing carries the craft. How sections and details are finished in 2D on the model's cut.

HOW MUCH OF A DRAWING IS MODEL, AND HOW MUCH IS 2D Plans and façades 1:50 – 1:100 model ~80 % 2D ~20 % Sections 1:20 – 1:50 model ~50 % 2D ~50 % Details 1:5 – 1:10 model ~30 % 2D on the model's cut ~70 % The closer to the craft, the more of the drawing is drafted: fixings, sealant, laps, flashings and notes.
Rough shares, as a guide. They are guidance, not a quota: Stomra counts nothing. The model under a detail is still the model, so when a wall moves, the cut moves with it.

The rule: model or draft

A sheet is never all model. The model carries the building: walls, slabs, roofs, beams and their layers. The last part of a section, and most of a detail, is drafted in 2D on top of the model's cut. Four questions decide which is which.

Is it counted?

Quantities, costs, cut lists, orders.

Is it seen in another view?

The plan, the 3D view, the walk, the client portal.

Is it checked?

Clashes, structure, energy, fire, framing.

Does it move with the design?

It must follow when a wall or a level moves.

If any answer is yes, model it. If none is, draft it: screws, sealant, a membrane's lap, a flashing's bends, hatches and notes. They belong to the drawing at its scale, and drawing them as model elements makes the model heavier without making it more right.

ViewScaleWhat is drafted in 2D
Plans, façades1:50–1:100Dimensions, tags, texts, hatches, symbols.
Sections1:20–1:50Fixings, flashings, membranes and their laps, insulation, level marks, notes, dimensions.
Details1:5–1:10On the model's cut: components, repeating details, insulation, regions, masks, notes, build-up texts, dimensions.

A detail should be drafted: a detail with no 2D on it is not finished. A section can be.

The 2D toolkit

Every plan, section, elevation and callout draws the model's cut, and you draft on top of it. Use the item that draws most at once; single lines are for what nothing else draws.

Detail components

One object drawn at true size in the cut: a stud with its cross, a screw, a sealant bead, a flashing. Each comes from a 2D family and draws by Detail Level.

Repeating details

A component along a path, by spacing or count: battens, tiles, screws in a row.

Insulation

Batt insulation as one item along a path, bulge or zigzag, scaled to its thickness and clipped to a layer.

Filled regions

An area with a material's hatch or a solid fill. Line weight 0 draws no edge.

Masking regions

White over what is under it. With line weight 0 it has no edge, on screen, on paper or in the DXF.

Build-up texts

A type's layers as text, read live from the type, so the text follows when the type changes.

Dimensions, tags, notes

Dimensions tied to the model, tags that read the element, notes with leaders.

Callouts and drafting views

A callout is a child view at its own scale, crop and Detail Level. A drafting view is pure 2D, with no model.

A layer whose type draws it with a 2D family (roof tiles on their battens, boarding, battens at their spacing) is drawn with that family where a section or a callout cuts it at Detail Level Fine, in place of its hatch. At 1:20 and finer, Fine is the default.

A detail, step by step

  1. Callout. Draw a callout from the section or plan. Set its scale and Detail Level.
  2. Start from a saved detail if your organisation has one for this situation: right-click in the callout ▸ Insert detail… (see Saved details).
  3. Read the cut. Look at what the model draws here.
  4. Sort. List what the detail must show, and mark each thing model or 2D by the four questions.
  5. Model only what the rule says.
  6. Draft the rest with components, repeating details, insulation and regions, not line by line.
  7. Annotate with build-up texts, notes with leaders and dimensions tied to the model.
  8. Look once. Check the detail as a whole, then stop.

Most of the time goes into steps 6 and 7. That is right: it is where a detail's craft is.

When the cut draws wrong

Sometimes the model is right and the cut draws something you do not want on this drawing: a line too heavy, a hatch that hides the detail, a part that should be greyed. Do not change the model to make one drawing look right. Change how this view draws it.

Override Graphics in View

Right-click an element in a plan, a section, an elevation or a detail ▸ Override Graphics in View ▸ By Element… or By Category…. In that view only, you can set:

A field left at By view keeps the view's own look; Reset takes the override away. An element's own override wins over its category's. A category's overrides are also under the view's Visibility in the Inspector, with Graphics… beside each category and the overridden elements listed below.

Overrides are drawn wherever the view is drawn: on screen, on sheets, in the PDF, in issued drawings and in your assistant's pictures. The DXF carries an override's colour but not its weight or dashes. Overrides change the model's bodies, not a plan's symbols such as door swings, stairs or pipes, and 3D views keep their own look.

If the cut draws something that is plainly wrong, report it to Stomra as well. Then cover it in this view and go on with the detail.

2D families: your organisation's first

A detail component is drawn from a 2D family: a parametric 2D object with an insertion point, drawn by Detail Level. How your details are composed is your organisation's to decide, so the families it keeps come first.

Saved details

A detail drawn well once should not be drawn again. Stomra keeps a detail's 2D, with its scale and the families its components use, and puts it into another view as a copy.

  1. Save in the project. Right-click in a callout ▸ Save as detail… keeps its 2D as a drafting view of its own, under the name you give it.
  2. Save in the Handbook. A view added to the Handbook with Add to the Handbook… keeps its 2D beside its picture, and says which view and project it came from.
  3. Insert. Right-click in a callout or a drafting view ▸ Insert detail…: your organisation's examples first, then this project's details. The copy is placed where you right-clicked and turned as you ask, as one Undo. In the Handbook, an example that holds 2D can be inserted into the view that is open.

A copy is 2D alone: tags and dimensions tied to the model are not carried, so add them in the new view. Each copy stands on its own; changing it does not change the original.

2D that notices the model

Drafting on the model has one risk: the model changes and the 2D on top does not. Stomra watches for it.

A free 2D item (a line, region, mask, insulation strip, component, text, leader or free dimension) in a plan, section, elevation or detail remembers what part of the model was drawn under it. When that part changes, such as a floor raised, a wall made thicker or a beam moved, a small amber mark appears at the item's corner.

A change of name or property, a change of the element away from the item, or recolouring the item does not count. Tags, dimensions tied to the model and hosted items follow the model by themselves and get no mark. A component or note hosted on an element also turns with it: turn a wall in plan, or change a beam's slope in a section, and what is hosted on it turns too.

With your assistant

Your AI assistant follows the same rule. It models what is counted, seen in another view, checked or moves with the design, and drafts the rest on the model's cut, with the heavy items first. When a cut draws wrong and the model is right, it reports it, overrides the look in that view and drafts over it, instead of changing the model again and again. It looks for your organisation's saved details and families first; when no family draws a thing, it draws one and asks you whether it is the project's or the organisation's. Stomra tells it when it slips: when it changes one element again and again while drafting, draws a view in single lines, lays a white mask over the cut, or puts a detail on a sheet with no 2D on it. See Ask for the light form.

Draft detail 3 on the section's cut: start from our saved eave detail if there
is one, then regions for materials, an insulation item for the mineral wool,
a repeating detail for the battens. No single lines.
The section draws the trusses too heavy. Don't change the model: override
their lines in this view only.