Stomra · Guide
Groups
A group is a set of elements drawn once and placed many times. Change it at any instance and every instance follows.
What a group is
Many buildings repeat themselves: a row of houses of one type, the same flat on every floor, a column with its footing along a grid. A group lets you draw such a set once and place it as many times as you need. Each placing is an instance, and all instances are equal: there is no master copy. Change the group at any one of them and every instance changes with it.
The elements of every instance are ordinary elements in the model. Quantities, schedules, sections and exports count and draw each instance as it stands, so thirteen houses of one type are thirteen houses in every list.
| Word | What it means |
|---|---|
| Group | The set of elements, with a name, such as "Row house". Listed under Groups in the Navigator. |
| Instance | One placing of the group. Each has a mark: the first takes the group's own mark (A), the others the next free marks (A-2, A-3 and so on), or a mark you type when placing it. |
| Origin | The point of the group that an instance is placed by: the lower left corner of what its elements cover in plan. |
| Turn, lift, level | Where one instance stands: turned by so many degrees, lifted by so many millimetres, on which level. |
Make a group
- Select the elements that belong together: walls, slabs, roof, doors and windows, whatever makes up the house or the flat. What is hosted on a selected element (a door in a wall, for example) comes along.
- Choose Group (Ctrl G), from the right-click menu, the selection's tab or Build ▸ Groups.
- Give the group a name. Where the plans hold 2D items near it, or regions it stands in, the same dialog offers them (see below).
The selection is now the group's first instance. A message says so, and that a double-click edits it.
A group is refused, with both elements named, when a selected element is tied to one outside the selection (a host, an attachment or a join), or when an element is in another group already. Take the tie away, or include the other element, and group again.
Select and place instances
A click selects the whole instance
A click on any element of a group selects the whole instance it belongs to, and the group's other instances are outlined so you see what is linked. The Inspector shows the group's name (which you can change there), which instance it is ("A-2 · 2 of 3"), and its turn, lift and level. To select every instance of the group at once, choose Select all instances from the right-click menu, or Select all in the Inspector.
The Navigator's Elements tab lists the groups at the top, each with its instances under it. A click on an instance selects it.
More instances
Any of these makes another instance of the selected group:
- Copy, Array or Paste on a selected instance.
- Place group (Build ▸ Groups), Place another in the Inspector, or the plus beside the group in the Navigator. Click in a plan where the group's lower left corner goes; the tool strip has the turn, the lift, the level and an optional mark. Keep clicking for more; Esc finishes.
Placed in a plan, an instance lands on that plan's level, so the same flat can be placed floor by floor.
Move, turn and remove
Move and Rotate take the whole instance; no other instance moves. Delete removes the instance. Turn, lift and level can also be typed in the Inspector.
Edit a group
- Double-click any instance in a plan, a section or an elevation, or select it and choose Edit group (in the Inspector, the selection's tab or the right-click menu). In the 3D view, use Edit group.
- The status line says which group you are in and how many instances the change reaches. Work as usual: every tool draws, moves and deletes as it always does, in the instance you entered and in its own coordinates.
- What you draw joins the group and appears in every instance at once. What you delete leaves every instance.
- Press Esc, choose Finish, or double-click outside the group to leave it.
While you are in a group, two more commands are offered:
- Take out leaves the selected elements where they are as ordinary elements, and takes them out of every other instance.
- Add to group takes elements that are not in a group into it, so every instance gets them.
Undo steps back as usual. Outside the edit, an element of a group cannot be changed on its own: Stomra says so and points to Edit group or Ungroup.
Ungroup one instance
When one house needs a change the others should not get, select it and choose Ungroup (Ctrl Shift G). That instance becomes ordinary elements, standing where it stood; the other instances stay a group. Ungrouping the last instance ends the group.
Ungroup is for the one-off. When several instances need the same different version, ungroup one, change it, and group it again as a group of its own; then place that one where it belongs.
2D items and regions that go with a group
A house on a site plan often has 2D items around it: a hedge, a patio, plot lines, notes. When you make a group, Stomra offers the 2D items in its plans that lie wholly within 2 m of it, ticked plan by plan. Leave a plan ticked and moving or turning that instance moves and turns those items with it. Each instance keeps its own items; a newly placed instance takes none, and an item's properties show which instance it moves with (or none).
A house also stands in regions, such as the grass or paving of a block. Rather than notching each house out of the region by hand, draw the region whole: when you make the group, Stomra offers the regions its floors overlap, and the instances are cut out of them where they stand. Move a house and its hole moves with it. A region's properties show which instances cut it. The hole is drawn in the plan, on sheets and in their PDF and DXF.
Both work in plans, not in sections or elevations. Tags, dimensions to faces and hatches of a host already follow their element, so they are never offered.
Rules and limits
No groups inside groups
An element is in one group at most. Nesting is where groups grow fragile, so Stomra keeps them flat.
No mirrored instances
An instance is turned, never mirrored. For a mirrored house type, make a second group.
Ties stay inside
A member may not be hosted on, attached to or joined with an element outside the group.
Views keep their annotation
Tags, dimensions and hidden elements in a view refer to an instance's own elements and keep holding.
A room in an instance other than the first is numbered with that instance's mark in front, so room numbers stay unique. A change to a group rebuilds every instance, so a group placed many times takes longer to change than a single house.
Groups and your assistant
An assistant connected to Stomra knows groups. It can make one, place, move, turn and lift instances, put one on another level, edit the group at any instance and ungroup one. When it reads the model, a group comes once with each instance as a short record of where it stands, so a site of thirteen type houses reads as one house and thirteen places. Counts and sums are still of every instance. See Modelling with AI for connecting one.
A useful request: "make the house on plot 1 a group called Row house, then place four more along the street, 9 metres apart". Moving a whole building with its grading and 2D items is then one move, not hundreds.
If you come from another tool
The behaviour follows what most BIM and CAD users already know from linked groups, components and blocks: a click selects the whole, a double-click edits all, and one is freed for the exception. In some tools a "group" is a set whose copies are not linked; in Stomra they always are, which is why the status line counts the instances an edit reaches.
| Tool and thing | Linked | To edit all | To free one |
|---|---|---|---|
| Stomra, group | Yes | Double-click, or Edit group | Ungroup |
| Revit, model group | Yes | Edit Group | Ungroup |
| SketchUp, component | Yes | Double-click | Make Unique |
| AutoCAD, block | Yes | Double-click | Explode |
| Archicad, hotlinked module | Yes | Edit the source file | Break the hotlink |
| Archicad or SketchUp, group | No | Each copy is its own | Ungroup or Explode |