Stomra · Guide
The client portal
One page per project where your clients open the issued drawings, read what changed, weigh alternatives, turn and walk the model, and mark up.
What the client portal is
The client portal is a project's own page on portal.stomra.com, for the people outside your organisation who look at the work: the building owner, the contractor, a municipality, another consultant. It shows what you have published, never the model you are working in.
Made from the model
Drawings, the 3D model, the walk and the IFC all come from the issues you publish. Nothing is exported and uploaded by hand.
Published, not live
A client sees each drawing as an issue sent it. Work in progress, other projects and the project's history stay out of sight.
No account to look
A personal link opens the page in any browser, on a phone too. Signing in is only needed to take part.
You publish issues and invite clients from the project's Client portal button in Stomra. Those steps, and review rounds with named reviewers, are in The review flow. This guide is about the other side: what a client finds on the page and what they can do there.
The link and signing in
Each client gets a personal link, mailed by Stomra in your name or sent by you. What the link allows is set when it is made: whether earlier issues show, whether downloads and markups are allowed, and how long it works (15, 30 or 90 days). A link that has run out lets the client ask for access again; you renew it from the client list.
| With the link alone | Signed in as well |
|---|---|
| Open the page, the drawings, the models and the walk | Everything the link allows, and: |
| Compare revisions, measure | Mark up drawings and write what should change |
| Print and download, where allowed | Answer in a markup's conversation |
| Read Changes and the reports | Choose an alternative, and give a decision in a review round |
Signing in uses a free Stomra account: Google, or an email link or code. What a signed-in client draws, writes and decides is then theirs, by name. A signed-in client gets a mail when you answer their note, change its state or ask them to review a drawing, at most twice a day, and can turn that off on the portal.
Whoever has a link can open what it shows, so it is sent only to the person it is for. Cancelling a link ends it at once.
The page
The page reads from top to bottom, like a portfolio rather than a file server:
- The cover. A picture or a short film across the top, with the project's name, a subtitle and its facts: location, client, assignment and date.
- The alternatives, when the project has published more than one. A card for each, with its number, title and newest revision; the recommended one is marked and the page opens on it. See Alternatives.
- The open set. Its revision, a line about it, and Changes since the issue before.
- Models: your model to turn, and any IFC models you shared beside it.
- Drawings, in numbered sections by discipline, each at its newest revision.
- Reports and quantities, and other files you shared.
- Walk through the model, where the issue carries the 3D.
- Issues, folded at first: every issue as it went out, where the link shows earlier issues.
A project with no model starts with the drawings. Closing a model or a report, or pressing the browser's Back, returns to the page where the client left it.
Drawings and revisions
What opens is the current set: every drawing at its newest revision. That is what most visits are for, and nothing stands in its way. Where the link shows earlier issues, the Revision menu lists the issues of the open alternative, newest first, and Earlier revisions lists the older ones. A set with a single issue has no menu: its current set is that issue.
A drawing opens in the portal's viewer as its issue sent it, drawn from the issued file rather than from a PDF, so it is sharp at any zoom and can be measured at each view's scale.
| In the viewer | What it does |
|---|---|
| Page Up, Page Down | The sheet before or after. |
| Ctrl + / Ctrl − / Ctrl 0 | Zoom in, zoom out, fit the sheet. |
| M Measure | Length, polyline or area, snapping to the drawing's lines. Nothing is kept or sent. |
| X Compare | Compare with another revision, or the same drawing in another alternative. |
| A PDF of the drawing that says in its margin which revision it prints. | |
| Download | The sheet's PDF as it was issued, where the link allows downloads. |
A print is a copy, like paper. Its QR code opens a check, without a sign-in, that says whether that revision is still current. More in The review flow and Issued drawings.
Changes: the change memo
Each issue on the portal says what changed since the issue before it on the same alternative. In Swedish practice this is an ÄndringsPM, a change memo sent with a revised set. On the portal it is called Changes, and it is written by Stomra from what it already knows: the issued drawings and the model's version comparison.
- The drawings: which were revised, and from which revision mark to which; which are new; which are withdrawn.
- The model: what was added, changed and removed, grouped by level and kind of element, with notes where a type changed.
- PDF saves the same as a document, and it is inside Download everything.
The first issue of a set has nothing before it and shows no Changes. The issue's own description, which you write or let Stomra draft when you publish, stands with the issue and in each drawing's revision row. Inside Stomra the same summary is shown beside each issue in a sheet's history.
Comparing a drawing
With a drawing open, X or Compare turns comparing on, and the menu beside it chooses what to compare with: any other Revision of the drawing, or the same drawing number in one of the Other alternatives. Comparing stays on as the client moves from sheet to sheet.
Show changes
The drawing goes faint and only what changed glows: changed in amber, added in green, removed dashed in red.
Before | After
Both drawings whole, with a line between them to drag. B switches to it.
[ and ] step from one changed place to the next, F shows the whole sheet, and M measures in either mode. These are the same tools and keys you use in Stomra's Review, described in Versions and alternatives.
A page or a link can be set to show the current set only. The client then sees no Revision menu, no list of issues and no earlier revision to compare with.
Alternatives and the client's choice
When you publish from more than one alternative, each is a set of drawings of its own. Revisions follow each other within an alternative; one alternative never replaces another's drawings.
On the page
- The alternatives stand first under the cover: Alternative 1 is the project's own design, then Alternative 2, 3 and on, each with the title and line you gave it. The cards stay in view as the page scrolls; on a phone they scroll sideways.
- The page opens on the alternative you recommend, or on the one with the newest issue when none is recommended.
- Under the cards, a line about the open alternative and its key figures: its mass and its number of items, as its issue kept them.
- Until an alternative issues a drawing itself, it shows the project's own drawing of that number from before the alternative started.
- An alternative's prints carry its name in the title block and the file name, since alternatives share drawing numbers.
Compare alternatives
Compare alternatives puts them side by side, one column each, headed by its picture, number, title and newest revision.
- Figures read from each alternative's published model: mass in total and by material, and how many of each kind of element. Figures that differ come first; those that are the same fold under one line. The lowest total mass is marked. These are quantities, never costs.
- Drawings by number: each drawing number on a row, the ones that differ first with Compare, which opens the drawing compared with the same number in the other alternative. Drawings identical in every alternative fold away.
- Each column ends with Open it and, where its model was published, Walk through it.
The client's choice
- A signed-in client presses Choose this one under the alternatives, or Choose in Compare alternatives, and may add a word about why.
- It is a request. Nothing changes until your team answers, and the client can Take it back while it waits. Choosing another replaces it.
- Everyone who edits the project hears of it under the bell. In Stomra it stands under the alternative it names, with Confirm the choice and Answer. Your assistant can read and answer it too, on your word.
- Once confirmed, the page marks that alternative Chosen and the others Not chosen; they stay on the page. A signed-in client hears of the confirmation or the answer by mail.
A client's choice never changes the model. Taking the chosen design into the project stays with you, in History. When an alternative is made the main project, the portal shows it as the project, and its revisions go on. See Versions and alternatives.
The 3D model and the walk
Under Models, your model is a small 3D view to turn with a drag, on its ground and with its materials' patterns. It is made from the published model itself, and always shows every element: nothing hidden and nothing see-through, whatever your working 3D view hides. Click it to open it large.
- Turn, zoom and move with mouse, trackpad or touch. The line under the model names the gestures and offers to switch between mouse and trackpad if it guessed wrong.
- The section box is on when the large view opens, round the whole model: drag an arrow to look inside.
- Issues: the large view lists the issues that carry the model. A click, − + or a digit shows that issue's model in place, with the camera kept, so two issues flip and what differs jumps out.
- Download IFC, as IFC4 or IFC2X3, where the link allows downloads. Where the issue kept no IFC file, it is written in the client's browser from the published model when asked for.
- Play the work, where the model keeps its phases: the building through demolition and construction, phase by phase. See Phases.
Walk through the model opens the same walk mode as in Stomra, in the client's browser, with nothing to install: keyboard and mouse, touch or a game controller. The client steps between the issues as you step between versions, and T tints what differs. The keys and how walking works are in Walk mode.
IFC files you share beside your model, such as another consultant's, are shown under Models as well, to turn and cut. You can set what the page's 3D shows of the site: the finished ground, the existing ground, the excavation, or the building alone.
Markups and requests
A signed-in client marks up a drawing with the same tools and keys as Review in Stomra: clouds, callouts, text, pen and highlight, lines, arrows, shapes and measurements. Each markup asks What should change here?
- The client draws round the place and writes the request under Your request, then presses Save (or Ctrl+Enter).
- The markup says No words yet until there is text, then Not answered yet until your team sets a status.
- Your team sees it at once under the bell, with the client's name and the sheet, and the project's owner gets a short mail. In Review, the markup opens zoomed in on the place.
- Your answers appear under Conversation, with your organisation's name. The client can reply there.
- When the change is made and the next issue published, the client opens the new revision and compares it with the one they marked up.
Markups are kept on the drawing in the sheet's own coordinates and tied to the model's elements, so an AI assistant connected to Stomra can read what a client asked for, where, and on which elements, and work on it in your project. You review and publish; nothing reaches the client before that. See Modelling with your AI assistant.
For a formal decision on a drawing, with named reviewers, note states and Approved or Not approved, start a review round: The review flow.
Reports, files and downloads
- Reports and quantities show as cards. A PDF report opens on the page in a reader, with zoom and text that can be selected and searched; it has its own address, so it can be sent to someone else who has a link.
- Other files, such as DWG, DXF or spreadsheets, open or download as the link allows.
- Download everything (ZIP) takes the set: a print of each drawing, the kept files and the Changes PDF.
What you control
The page is yours to arrange, from Stomra's Client portal view, where you see it as clients do:
- Edit page… sets the cover, the project's facts and the files beside the drawings. Files you drop on the page are kept in the project's files.
- A × takes a drawing or a file off the page, and Put back returns it. Publishing a sheet again puts it back by itself.
- Recommend this alternative sets which one the page opens on. Each tab can be renamed, and each alternative can be turned off for clients when you publish; its issues are kept, to put back.
- Clients see the current set only, or every issue, for the whole page; a link can say otherwise for its one person.
- Under Clients, each client's link with what they opened, downloaded and marked up, and a menu to copy, resend, renew or cancel it.
Publishing and inviting are in The review flow. Clients are not members of your organisation and never open the model; the people who work in the model are added with Share, described in Projects on stomra.com.
The words
| Word | What it means on the client portal |
|---|---|
| Client | A person with a link to the portal. Signed in, they can mark up, choose and review. |
| Issue | Drawings sent out together, with a status and a purpose. Made by Publish. |
| Revision | One drawing as one issue sent it, by its mark: –, A, B … |
| Current set | Every drawing of an alternative at its newest revision. What the page opens on. |
| Changes | What changed in an issue since the one before: the change memo (ÄndringsPM). |
| Alternative | A design published as a set of its own. Alternative 1 is the project's own. |
| Recommended | The alternative you point clients to; the page opens on it. |
| Chosen / Not chosen | A client's choice, once your team has confirmed it. |
| Markup | A drawing on a sheet with a request, and a conversation under it. |